JK,Gear,non-Rubicon,Yukon,commonsdev.pratt.edu,Jeep,Install,/procedures_and_tests/article.htm,(YGK055),for,Kit,$376,Automotive , Replacement Parts , Transmission Drive Train,Axle $376 Yukon Gear Axle (YGK055) Install Kit for Jeep JK non-Rubicon Automotive Replacement Parts Transmission Drive Train Yukon Gear Axle YGK055 Install non-Rubicon JK Jeep for Max 65% OFF Kit Yukon Gear Axle YGK055 Install non-Rubicon JK Jeep for Max 65% OFF Kit JK,Gear,non-Rubicon,Yukon,commonsdev.pratt.edu,Jeep,Install,/procedures_and_tests/article.htm,(YGK055),for,Kit,$376,Automotive , Replacement Parts , Transmission Drive Train,Axle $376 Yukon Gear Axle (YGK055) Install Kit for Jeep JK non-Rubicon Automotive Replacement Parts Transmission Drive Train

Yukon Gear Axle YGK055 Install non-Rubicon JK Houston Mall Jeep for Max 65% OFF Kit

Yukon Gear Axle (YGK055) Install Kit for Jeep JK non-Rubicon

$376

Yukon Gear Axle (YGK055) Install Kit for Jeep JK non-Rubicon

|||

Product description

Style:Jeep TJ Dana 30 Front Model 35 Rear 4.88 Ratio

Ring and Pinion Gear Sets from Yukon Gear and Axle are designed to perform in the most demanding of conditions. Our Gear Install Kits are a simple, single purchase for those looking to upgrade a four wheel drive vehicle with these high performing ring and pinion gears.


From the manufacturer

Anatomy of a Ring amp; Pinion

Anatomy of a Ring amp; PinionAnatomy of a Ring amp; Pinion

OVERVIEW OF A RING amp; PINION

OVERVIEW OF A RING amp; PINION

A ring amp; pinion set transfers power from the driveshaft to the axles. The pinion gear is mated to the driveshaft via a yoke and universal joint and drives the ring gear. The ring gear is mounted on a carrier assembly which in turn drives the axles and wheels. Different gear ratios are desirable for different applications and usage. Gear ratio is calculated by dividing the number of teeth on the ring gear by the number of teeth on the pinion gear. The higher the number, the lower the ratio: a 5.29 gear has a lower ratio than a 4.10 gear. With a lower gear ratio the drive shaft (and thus the engine) turns more for each revolution of the wheel, delivering more power and torque to the wheel for any given speed. Lower ratios are generally desirable when going off-road. Higher ratios are better for freeway driving since they run at lower RPM’s and offer better fuel economy.

DIFFERENTIAL INSTALLATION KITS

When a ring and pinion is purchased, it is beneficial to install them with a Differential Installation Kit since you will have everything opened up.

This is a great opportunity to replace all of your bearings, seals, bolts, crush sleeve, shims and other small parts to insure longevity and optimal performance.

Yukon Master Installation Kits: Everything You Need to Install a Ring amp; Pinion In One Kit

Anatomy of a Master Installation KitAnatomy of a Master Installation Kit

ESSENTIALS: Having all the Right Components and Small Parts for a Differential Rebuild is Essential.

A complete differential overhaul requires the use of a master overhaul kit, which contains all of the essential, high quality, components necessary for a rebuild. These are the most complete kits on the market, specially tailored for each application. Kits almost exclusively use all Timken or Koyo bearings. High quality components used throughout. Comprehensive Instruction Manual including ALL necessary specs involved in Differential set-up.

Kits May Include:

  • Thread Locker
  • Marking Compound amp; Brush
  • Pinion Seal
  • Shims
  • Races and Bearings (High Quality Koyo or Timken)
  • Cover Gasket or Sealant
  • Pinion Nut
  • Crush Sleeve
  • Ring Gear Bolts

Everything You Need in One Package!

Everything You Need in One Package!Everything You Need in One Package!

ONE PACKAGE: Front and Rear Ring amp; Pinions with Installation Kits

Rest at ease and re-gear your Toyota with our easy All-In-One Gear amp; Installation Kit from Yukon Gear amp; Axle. Delivering Top Quality Parts that meet or exceed OE specifications for strength, durability, longevity, quietness, setup, and more. When quality is necessary, look no further than Yukon Gear amp; Axle.

OEM-Style Replacement

Yukon manufactures a full line of high-quality OEM replacement ratios to accommodate most SUVs, light trucks and rear-wheel-drive passenger cars. Yukon duplicates, and often exceeds, the OEM specifications. This is the case with the GM 8.5” (below) and Chrtysler 9.25” gears. These gears are engineered to last longer and run cooler and quieter than other aftermarket gears. When properly set up Yukon gears are extremely quiet.

Heavy Duty Towing

In many cases the factory ratios are not low enough to give you the pulling power you’re looking for from your tow rig. Yukon has the answer to all your trailer-pulling needs. We offer a full line of gear ratios from 2.73 thru 7.17 for most 2 and 4WD trucks and SUVs. So if you’re looking for more power or you’re correcting for larger tires, Yukon has you covered.

Racing and Performance

Yukon is always working hard to maintain its position on the cutting edge of the racing world as well as the differential industry. We offer a large variety of ratios for the Ford 9”, GM 12-bolt passenger car and many more. These gears are built to withstand high horsepower and to survive under extreme conditions. For the weight-conscious racer, Yukon offers Ford 9” lightweight gears in ratios from 4.22 to 7.33. These gears lower the rotating mass, which translates into more power to the ground.

Yukon Gear amp; Axle Offers the Highest Quality Gears on the Market

Yukon Gear amp; Axle Offers the Highest Quality Gears on the MarketYukon Gear amp; Axle Offers the Highest Quality Gears on the Market

Super High Quality Steel Exceeds OE Specifications

ENGINEERED TOUGH: Yukon gears are engineered to last longer and run quieter and cooler than other aftermarket gears, for long life, durability and performance.

HEAVY DUTY TOWING: In many cases the factory ratios are not low enough to give you the pulling power you’re looking for from your tow rig. Yukon has the answer to all your trailer-pulling needs.

RATIO RANGES: Yukon Gear amp; Axle offers a full line of gear ratios from 2.73 thru 7.17 for most 2 and 4WD trucks and SUVs. So if you’re looking for more power or you’re correcting for larger tires, Yukon has you covered.

RACING amp; PERFORMANCE: Yukon is always working hard to maintain its position on the cutting edge of the racing world as well as the differential industry. These gears are built to withstand high horsepower and to survive under extreme conditions.

Yukon Gear Axle (YGK055) Install Kit for Jeep JK non-Rubicon